Mach3 یک کامپیوتر معمولی را به یک کنترلر ماشین CNC تبدیل می کند Mach3 روی اکثر رایانه های شخصی ویندوزی برای کنترل حرکت موتورها (Stepper & Servo) با پردازش G-Code کار می کند. برد کنترلر cnc پنج محوره سازگار با تمامی ویژگی های نرم افزار پرطرفدار mach 3 بوده و در تمام پروژه های CNC از ۳ محور تا ۵ محور قابل استفاده است. این برد کنترلی دارای ورودی USB جهت تغذیه مدار و پورت موازی جهت اتصال به نرم افزار است. همچنین این برد مجهز به رله بوده و دارای ایزولاتور جهت حذف نویز است. ولتاژ کاری این برد  5 ولت میباشد. همراه این کالا یک عدد کابل USB  ارسال می شود

 fully support of MACH3 and other computer software support for parallel port control.

 USB power supply and peripherals powered phase separation to protect computer security.

 peripheral wide voltage input,12-24V, and anti-reverse function.

all of the input signal, all the light lotus isolated, which can be accessed emergency stop on the knife, the limit to protect computer security.

 all the way to the relay output port, control spindle switch. Output port P17 mouth.

 all the way through the optocoupler isolated 0-10V analog voltage output can be controlled with the corresponding analog interface converter to control the spindle speed. Output port P1 port.

open all 17 ports, which can be accessed with the optocoupler drive, 5-axis stepper motor can be controlled.

 P1 as PWM outputs can be controlled with optocoupler input spindle governor.

 can be accessed by a common cathode or common anode input level to 5V drive.


Description

Fully support of MACH3 and other computer software support for parallel port control.USB power supply and peripherals powered phase separation to protect computer security.Peripheral wide voltage input,12-24V, and anti-reverse function.All of the input signal, all the light lotus isolated, which can be accessed emergency stop on the knife, the limit to protectcomputer security.

Feature

All the way to the relay output port, control spindle switch. Output port P17 mouth.All the way through the optocoupler isolated 0-10V analog voltage output can be controlled with the correspondinganalog interface converter to control the spindle speed. Output port P1 port.Open all 17 ports, which can be accessed with the optocoupler drive, 5-axis stepper motor can be controlled.P1 as PWM outputs can be controlled with optocoupler input spindle governor.Can be accessed by a common cathode or common anode input level to 5V drive.