برد کنترلر سی ان سی  Mach3 ماخ تری یک کنترلر بر مبنای پی سی بیس PC Base می باشد و تمامی امکاناتی را که یک کنترلر قدرتمند نیاز دارد درون خود دارد اینترفیس و برد واسط در پایین ترین سطح توانایی کنترلر همزمان 6 محور را دارد.برد Smooth Stepper با واسط یو اس بی USB یا LAN سرعت انتقال دیتا و امنیت دیتا را بالا برده و با بافر کردن اطلاعات خروجی بسیار خوبی برای درایوها آماده می نمایدMach3 دارای یک محیط برنامه نویسی اسکرین Screen جهت طراحی صفحه بصورت شخصی و دلخواه می باشد.

مشخصات فنی :

طول USB کابل : 1.5M

طول paralelo کابل: 1.5M

اندازه برد: 7.5x11x2.4cm

ولتاژ ورودی: 15 تا 30 ولت

ولتاژ خروجی: 5/12V

ظرفیت خروجی: 100MA

CNC software for mainframe computers and peripheral power control signal transfer and processing.

Feature:
  all output and input models by Philips dedicated high-speed chip processing, the signal is an integer, amplification, eliminating unnecessary interference signal. The operation of the machine more stable.
- USB and external power supply. The power supply isolation. Computer and data processing machines more secure
  all of the input signal by the optical coupling isolation all of which P11, P12 port for high-speed optical coupling can be used to connect the spindle encoder, or hand-wheel A, B equal to demanding signal.
  there is a special off the total electric power supply of the relay, the computer shuts down automatically when carving machine with other equipment, turn off all power.
  there is a special relay switch coolant supply, support MACH3, G code programming (parallel port P3, G code to open M8, M9 off), the relay switch on the lights. Easy to determine the power off.
  there is a spindle-powered ad hoc relay support MACH3, G code programming (parallel port P2 I, G to open the code M3, M2 off), the relay switch on the lights. Easy to determine the power-off
  on the spindle speed control: special high-speed optical coupling isolation, can output PWM signal output for the parallel port P1.
  the interface board have a PWM to 0-10V digital-analog conversion circuit. Can output 0-10V level to control the market and control the speed of only analog converter. To control the spindle speed. Output for the parallel port P1.
  the interface board can be connected common cathode or common anode output to the stepper drive or servo drive. Output for the 5V level.
  wide voltage power supply, 12V or 16-35V can choose a set of two power supply. Reversed with anti-power input design.

5 input port:
  Port description
  P10 X limit
  P11 on the knife
  P12 emergency stop
  P13 Y limit
  P15 Z limit

11 output ports:
  Port description
P4 X pulse
  P5 X direction
  P6 Y Pulse
  P7 Y direction
  P8 Z pulse
  P9 Z direction
  P16 4 pulse
  P17 4 Direction
  P2  alternate port
  P3 alternate port
  P14 spare port

Package list:
  1 * 6 Axis Interface board

 1 * USB cable