• سبد خرید شما خالی است!

فیلامنت پیک ایسان ePEEK Pro 1.75mm Natural 0.25kg

  • تولید کننده: ایسان eSun 3D Filament
  • کد محصول: ePEEK Pro - Natural
  • موجودی: در حال حاضر موجود نمی باشد
  • بازدید: 6878
  • قیمت : ! ناموجود !

0 نظر / نظر بدهید

وقتی صحبت از فیلامنتهای منحصر به فرد و عجیب می شود برندهای کمی وجود دارند که می توانند انتخاب های متنوعی را که ESUN انجام می دهد ارائه دهند و در عین حال تحمل ها و سازگاری ها ی چشمگیر را در هر قرقره حفظ کنند یکی از این پلیمرها ی منحصر به فرد که شرکت ESUN تولید می کند ePEEK Pro 1.75mm است که از پلی اتر  اترکتون پلیمر شده است پلیمری کریستالی که مقاومت و دوام فوق العاده ای را در دمای بالا ارائه می دهد و مزیت فوق العاده سبک بودن را نیز دارد این امر آن را برای کاربردهای با شدت بالا مانند قطعات هواپیما و هوافضا و همچنین در پزشکی ایده آل می کند که همگی به نسبت استحکام به وزن بالایی نیاز دارند

 ePEEK Pro یک فیلامنت ویژه با خواص مکانیکی و حرارتی عالی است . استحکام بالا - چقرمگی بالا (تنش کشیدگی ) - بازدازنده شعله - مقاومت در برابر ضربه -مقاومت در برابر سایش - مقاومت شیمیایی -مقاومت در برابر حرارت -خود روان کننده . با این فیلامنت می توان چرخ دنده های مکانیکی را چاپ کرد این فیلامنت با رنگ طبیعی بژ و قطر 1.75mm و وزن 0.25 کیلوگرم (250 گرم ) است این مقدار کم در درجه اول نتیجه هزینه های بالای مربوط به مواد و پردازش PEEK است اما از آنجایی که این فیلامنت برای چاپ های بسیار تخصصی طراحی شده است می توانید انتظار داشته باشید که به ندرت و اغلب و فقط در صورت نیاز از آن استفاده کنید

مشخصات فنی :

ماده: ePEEK Pro 

رنگ: طبیعی  بژ

تلرانس: 0.03 mm  

وزن خالص: 0.25  کیلوگرم ( 250 گرم )

قطر: 1.75 میلی متر

 دمای چاپ: 410-390 درجه سانتی گراد

دمای هیت بد : 150- 100 درجه سانتی گراد

ویژگیهای  فیلامنت ePEEK Pro :

- استحکام، سختی و دوام  فوق العاده بالا

- مقاومت شیمیایی 

- مقاومت در برابر ضربه ، مقاومت در برابر سایش

-بازدارنده شعله

- چقرمگی بالا

- مناسب برای قطعاتی که در معرض استهلاک و فشار هستند مانند قطعات هواپیما و هوا فضا ، و همچنین در پزشکی  که همگی به نسبت استحکام به وزن بالایی نیاز دارند


When it comes to Unique and Exotic Filaments, there are few brands who can offer the diverse selection that eSUN does while still maintaining impressive tolerances and consistencies throughout each spool. One such excitingly unique polymer that they produce is eSUN ePEEK Filament, which is polymerised from Polyether Ether Ketone, which is a crystalline polymer that offers incredibly high temperature resistance and durability, with the added benefit of being ultra-lightweight. This makes it ideal for high-intensity applications like aeroplane and aerospace parts, as well as within medicine – all of which require a high strength to weight ratio.

These spools of naturally Beige-coloured eSUN ePEEK Filament offer a 1.75mm diameter, and weigh in at 0.25kg. This low quantity is primarily the result of high costs associated with PEEK materials and processing, but because this filament is designed for very specialised prints, you can expect to use it very seldomly, and often only when the need arises.


ePEEK Pro: A Highly Specialised Polymer


Because PEEK is a very specialised material, it is typically not possible to print this filament on standard desktop or Hobbyist 3D Printers, and will require a specialised “High-Temperature 3D Printer” with a full convection-heated enclosure, ±400°C capable hotend assembly, as well as a good general design to keep the electronics and other parts away from the high temperatures. However, a few very experienced and savvy Makers have been able to convert their desktop 3D printers into high-temp printers, but this is not only difficult, and can also be costly, so if you’re unsure at all about whether you could do the conversion, it may be a better idea to simply utilise easier Exotic Filaments with similar capabilities instead.


Typical Applications for eSUN ePEEK Pro Filament:

Although many of us would love to try our hand at experimenting with this very specialised filament, it is unfortunately almost impossible to print with on standard hobbyist and Desktop 3D Printers, and requires special “High Temperature 3D Printers” to effective reach and maintain the extreme heat needed to extrude PEEK effectively.

However, there are some brave and endearing individuals in online Maker communities who have managed to transform hobbyist printers into high-temp’ printers, but this has typically cost them more in terms of time and money compared to simply buying a specialised printer. So while it may be possible to convert your 3D printer into a PEEK printer, it should be considered as more of a hobbyist project than a serious investment, since it will take a lot of time, effort and trial and error to get it printing right with reliable repeatability.

So if you have a standard desktop 3D printer, it may be a better idea to look at filaments like Nylon (PA) Filament or Delrin (POM) Filament if you want to print high-durability low-friction parts, as those filaments are very tricky to print with, but are still far easier to print than PEEK..



ePEEK Pro is a special plastic material with excellent mechanical and thermal properties; high strength, high toughness, impact resistance; self-lubricating wear resistance, can print mechanical gears; flame retardant; resistant to corrosion by most chemical reagents and solvents; high temperature resistance, heat distortion temperature up to 205℃, can be used for heat-resistant parts.

 

Features:
Chemical resistance; heat resistance; flame retardant; high toughness; high impact resistance; abrasion resistance.







:eSUN ePEEK Pro Filament  -Technical Specifications

 

 PEEK (Polyether Ether Ketone)                    

Plastic Type
1.75mmPlastic Diameter
 1.3Density (g/cm3)
205Distortion Temp (°C, 0.45MPa)
10
Melt Flow Index (g/10min)
100
Tensile Strength (MPa)
40
Elongation at Break (%)
170
Bending Strength (MPa)
4200
Bending Modulus (MPa)
6.5
IZOD Impact Strength (kJ/m2)
Total Weight                                                                                                                                                                                                                                                                                                0.25kg                                                                                                                                                    

:eSUN ePEEK Pro Filament  -  Suggested Print Settings

360-410
Print Temperature (°C) 
120-150
Bed Temperature (°C)
15-30
Infill Speed (mm/s)
40-70
Travel Speed (mm/s)
High Temperature Capable NozzleRecommended Nozzle
PEI Sheet RecommendedAdhesion Aids
Vital: Chamber Needs to Maintain High TemperaturesEnclosure
Activated Carbon FilterFilter Required





:Typical Applications for eSUN ePEEK Pro Filament


Although many of us would love to try our hand at experimenting with this very specialised filament, it is unfortunately almost impossible to print with on standard hobbyist and Desktop 3D Printers, and requires special “High Temperature 3D Printers” to effective reach and maintain the extreme heat needed to extrude PEEK effectively.

However, there are some brave and endearing individuals in online Maker communities who have managed to transform hobbyist printers into high-temp’ printers, but this has typically cost them more in terms of time and money compared to simply buying a specialised printer. So while it may be possible to convert your 3D printer into a PEEK printer, it should be considered as more of a hobbyist project than a serious investment, since it will take a lot of time, effort and trial and error to get it printing right with reliable repeatability.

So if you have a standard desktop 3D printer, it may be a better idea to look at filaments like Nylon (PA) Filament or Delrin (POM) Filament if you want to print high-durability low-friction parts, as those filaments are very tricky to print with, but are still far easier to print than PEEK.




نظر بدهید

لطفا وارد شوید یا ثبت نام کنید تا نظر بدهید

محصولات مرتبط

برچسب ها: Filament, فیلامنت, فلامنت, فیلامنت ها, فیلامنت ePEEK Pro 1.75mm Natural 0.25kg

بالا