فیلامنت ABS Max مشکی ایسان قطر 1.75 میلیمتر


گزینه های در دسترس

  • قیمت : 75,000 تومان

فیلامنت ABS Max یک ABS پیشرفته است که از +ABS پلاس قوی تر است در برابر شعله هایی که هالوژن (گروه هفتم جدول تناوبی هالوژن -عناصر F-CL-BR-I) ندارند مقاوم است ازخواص فیلامنت ABS Max کاهش انقباض ،کاهش پیچ خوردگی و کاهش بخارات سمی و همچنین سختی بالا ،جذب کمتر رطوبت و مقاومت در برابر ترک خوردگی تا دمای 20- درجه می باشد سختی سطحی بسیار بیشتری نسبت به ABS و +ABS دارد ظاهری سیاه  رنگ و مات دارد سخت و مقاوم در برابر خراش -سیالیت ذوب خوب ( در اثر ذوب به خوبی جریان پیدا می کند )  ،چاپ صاف ، مقاومت سایشی خوب و ثبات ابعادی ، مقاوم در برابر روغن، فیلامنت ABS Max در مقایسه  با  ABS و +ABS از استحکام بهتری برخوردار است بهترین دمای چاپ برای این فیلامنت 240-200 درجه سانتی گراد و دمای صفحه هیت بد بین 110-100 درجه سانتی گراد پیشنهاد می شود

 ماده:  eABS Max

رنگ: مشکی

تلرانس: 0.03 mm  

وزن خالص: 1 کیلوگرم

قطر: 1.75 میلی متر

بهترین دمای چاپ: 240-200 درجه سانتی گراد

دمای صفحه هیت بد : 110-100 درجه سانتی گراد

مزیت فیلامنت ABS:
معایب فیلامنت ABS:

- استحکام، سختی و دوام بالا

- ظاهر خوب قطعه چاپ شده

- قابلیت پولیشکاری

- دوام طولانی مدت

- مناسب برای قطعاتی که در معرض استهلاک و فشار هستند

-عدم امکان بازیافت

- بوی نامطبوع و سمی حین چاپ

- نیاز حتمی به بستر گرم شونده

- به دمای بالایی برای رسیدن به نقطع ی ذوب نیاز دارد

eSun eABS Max 1.75mm 3D Printing Filament 1Kg is a halogen-free flame retardant filament. With the reduction in shrinkage, warp, and fumes, eABS MAX also sees an incerase in toughness, lower moisture absorption, and temperature survivability (-20 deg C) without cracking.

Also, unlike other ABS filaments, the eABS MAX retains its sensitivity to acetone post-processing.

The appearance is black, nontransparent
Non-toxic, tough, hard texture, with good temperature tolerance and creep resistant
Good melt fluidity, print smooth, nice abrasive resistance and dimensional stability, oil resistance
    Compared with ABS and ABS+, it has better toughness, much improved in the craze, edge warping, whole layer stripping situations when printing objects with large corner
  Maintain 90% of physical performance in -20℃ low temperature and won’t crisp
    Waterproof, less than 1% of water absorption in normal temperature, which ensures flame retardant efficiency
Allow acetone polishing for appearance

About eABS Max 


 The appearance is black, nontransparent;

 Non-toxic, tough, hard texture, with good temperature tolerance and creep resistant;

 Good melt fluidity, print smooth, nice abrasive resistance and dimensional stability, oil resistance;

 Compared with ABS and ABS+, it has better toughness, much improved in craze, edge warping, whole layer stripping situations when printing objects with large corner;

 Maintain 90% of physical performance in -20℃ low temperature and won't crisp;

 Waterproof, less than 1% of water absorption in normal temperature, which ensures flame retardant efficiency;

 Allow acetone polishing for appearance.

Based on its character, it's suggested to print with ABS in closed area with proper ventilation. Let's see some notices for printing with eABS Max.

Printing notices

 Levelling printing plate before starting;

 Heat the hot bed to 80~100℃ before printing, paste transparent golden polyimide high temperature resistance tape to the surface and keep it clean;

 Keep a optimum distance between nozzle and plate (which allows you to paint out a flat line while moving your nozzles; if too far the line will be much mellow and too close will be hard to let filament out);

 A lower filling rate can remit shrinkage crack for ABS during printing process (about 5%~10% degree);

 Nozzle diameter better should be bigger than layer thickness. Try parameter like 0.2, 0.25, 0.3;

 Better keep cooling fan off when printing and print in a closed area. Putting flapper around printer also helps to keep constant temperature environment.

eABS MAX Parameters
 
Best print temperature: 200-240 °C
Plate temperature: 100-110 °C
Feed rate: 30-90mm/s
Idling speed: 90-150mm/s

Application are

With easy processing quality and good impact properties, it's suitable for cars, domestic appliance, office machine and other areas.






نظر بدهید

لطفا وارد شوید یا ثبت نام کنید تا نظر بدهید

محصولات مرتبط

برچسب ها: فیلامنت ABS Max مشکی ایسان 1.75mm, فیلامنت eABS Max مشکی ایسان

بالا